Hitachi CP-X250 LCD Projector The Temp & Lamp lights are flashing orange on my Hitachi CP-X250 LCD projector. I am assuming that that means that the Lamp needs to be replaced but was hoping someone ...
...Hitachi CP-X251 and from the computer the image is fine. From the projector, it has a yellow tint. The color/tint option is not available to me. I have adjusted the picture (red, blue, green), and ...
hitachi projector cp x251 sync is out of range error message does not power on
hitachi cp-x251 lcd projector cannot adjust the tint. reset the settings to factory default. make sure that if you are using the computer that you are on vga, not composite. if it doesn't get any ...
...cp x251 is uneven the top and right side are angled but the bottom and left side are straight and perfect on the screen. this is a common problem with projection systems this is the reason that most ...
Question about Cpx2510 Projector Cpx2510 Xga Projector Lamp
hitachi cp-x251 multimedia lcd projector wont power on? the lights wont turn on or the fan nothing as if it is unplugged. please help. This projector was sold with a 3-year manufacturers warranty. You
...CP-X251, the fan cycles several times and then the overheat light illuminates. Only takes about ten seconds... have you checked the filter. is there any blockage to air flow. is the machine mounted ...
100 hrs. passed after the last filter check. filter maintenance is essential I agree
It says to Check the air flow Open the cover. At some ends there will be 'filters', to clean the air entering the projector. If these filters are blocked with dust or lint, air flow will be ...
Question about CP-X251 LCD Projector
...Hitachi CP-X200 LCD projector I can only find the whole filter assembly for $45.00 and shipping. the foam piece is 2.250 x 5.00 by 1/8 inch AIR FILTER FOR HITACHI PROJECTOR CP X200 CP X300 CP X205 CP ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions