Questions & Answers for: high pressure freon port 1997

...passenger side near the dryer it will be the smaller port and have either a black or red cap. the ,low side pressure should be 35 psi and the high side should be 150 psi. please rate ...

...high pressure port. I also have a newer 2007 model f150 and easily found the low pressure port on it but cannot find on my 2001 f150. any help is appreciated It may be located on/near the evaporator ...

...pressure on both service ports need to be checked to be sure that this is the problem. the pressures should be 50 to 70 psi on the low side and about 225 to 275 psi on the high side. sounds like you ...

...high pressure line. You need to know which refrigerant is being used in this system as it could be the old R-12, which was banned. Could also be an R-12 system converted to R-134a with different high ...

pressure side, this is usually the one closest to the firewall. The reason that they are 6 inches apart is that they are on opposite sides of the orfice tube, hence one is high pressure and one is low

a/c high side has pressure low side nothing 1999 ford f150 5.4 a/c high side has pressure low side nothing freon not moving thru blocked expansion device

...have a high pressure port and a low the low port is what you want and it is the smaller of the two. most freon tubes from auto parts with the freon only come with the fitting that fits the low

front of the radiator. DO NOT CHARGE THROUGH THE HIGH SIDE NEAR RADIATOR WHILE CAR IS RUNNING. THIS IS EXTREME HIGH PRESSURE AND CAN CAUSE AN EXPLOSION. Hope this helps, and ya get some cool air again

...but here is what you are looking for. The Low Pressure Service Port has a Larger diameter than the High Pressure port. The High Pressure port will cause the freon can to explode if you connect to

...high pressure and low for adding refrigent to a 1997 Buick LeSabre custom Here's a link to your a.c. port,if you need to add some,then you may have a leakk,Midas does this at a good price,they have ...