Questions & Answers for: high mount stoplight

High mount stoplight I want to know how to replace the bulb in the high mounted stoplight I, too, have this same problem with my car. All the fuses are fine, and the bulbs are fine. The brake light in

...high mounted rear stoplight how do you change a bulb in the 2000 hyundai sonata high mounted rear stoplight? Research revealed no available illustration of procedure. If memory serves, there are two ...

stoplight switch) mounted high up on the brake pedal. Some have an adjustment, which hopefully is all that is wrong, it must be adjusted. Try pulling the brake pedal up, do the brake lights go off? If

upside down lightbulb with ''!'' in it probably telling you a taillight or stop light is out on the car check all rear lights including the high mount stoplight

...a solenoid for the brakes if so where is it? brake light sitch on brake pedal may be at fault.the high mounted brake light has a seperate circuit from the regular brake lamps.so if you have no

...high-mounted stoplight is not working? Where is the relay? If the two rear brake light are working on each side, then fuse and relay are good, check the bulb. The power circuit for the top/center ...

...high mounted stoplight lexus es 330 It is not as complicated as you think. You just reach the light housing from the rear seats and squeeze the housing to release it from the rear panel. Once it is ...

...stoplight switch comes from 20A fuse 5 in the power distribution center and is applied to the brake lamp switch (confusing, no?). Switch output is connected to a junction block and then to the center ...

...high mount lamp. Are lamps on? Yes No RELEASE switch and make sure that lamps turn off. CHECK Fuse 32 (15A). REPLACE open fuse if open, RESTORE vehicle, RETEST. If fuse is good, GO to BB2 . BB2 TEST ...

high mount brake light won't work and neither do the license plate lamps. I've already checked all the fuses and they are good. If 20A FUSE 26 in the intelligent power module is OK, then the stoplight