Questions & Answers for: help engine accessory noise

help me? I would start by splitting up the drive train to determine if it is accessory, engine or transmission related. There are a number of things that can cause a problem like this. 1) Is the noise

...engine noise only at idle. Cam area I have a 1988 Delta 88 with 170,000 mi. Engine started making a loud growling noise at an idle. Rev the engine up and it stops. Sounds high like a cam shaft. Runs ...

...balancer with the engine running and it still made the noise. What size engine? 4, v6, v????8 Engine code (8th VIN digit) When asking engine questions, it may help to let us know what engine you

...Engine - Accessory Drive Belt Noise Diagnostics/Tool 08-06-01-008 03/27/2008 This particular vehicle had an issue with pulley alignment, particularly the power steering pulley. Take a look at the ...

...engine static. Previous Radar Detector, Beltronics RX65 did not have noise. This unit does not work with clean alert sound at any level. Tried high amp noise suppressor and no luck. Switched wiring ...

...engine momentarily without the belt. If the noise disappears, at least you now know it is not an internal engine problem, and it will be an issue with one of the pulleys, or belt-driven accessories. ...

...electrics although most cars now have covers. Sorry can't help with ticking noise unless it's a lifter in the engine. Timing belt being rubber (if it is would sqeek). Often once warm would go ...

to speed. we put a computer on the engine and it says that the air pump is not working. I can't find anything about an air pump can you help me please? what was the actual code that the scanner showed

engine being very hot and crying for help, this is very serious and could cause complete engine failure. Do not start the car or attempt to drive the car it will need to be towed to your service shop.

...engine light on the dash board. please help changed the timing belt and all its accessories but still the noise persists Sounds as if you may have gotten belt installed with out putting all the cam ...