...range too hot Hsa control 1-6 simmer, bake and roast. When only on number 1 it is too hot and should only be at least on simmer. Help ! Sounds like a bad infinate switch. Replace the switch ...
simmer switch is in the off position, I just had the same problem and checked it back to the power connector and only had 120 V ????, I about to take the switch out and then saw the simmer switch that
...simmer I have a Kitchen Aid Gas Stove Top (Model KGCK366VSS). The top works great, actually too great. The burners when turned all the way down produce too much heat, making it impossible to simmer ...
Question about ACF4265AS Electric Kitchen Range
heats so hot that it burns food even on simmer setting. could there be a short in wiring that would cause this problem? Replace the infinite heat switch for that burner. (the part the knob connects to
...simmer select off, there is another, lounder click. Don't want to replace the switch if its okay, alrewady made the mistake of doing so with the element, and can only deduce it's the circuit board. ...
Question about ACF4265AS Electric Kitchen Range
...simmer, or B- element itself. The element itself is no more than a thin ribbon that can fail occasionally. The switch controls two circuits in the large element. Find a good tech that can check both ...
Question about ACF4265AS Electric Kitchen Range
...be so hot? simmer is actually medium high rather than simmer The switch itself is what cycles the burner to come on/off. If it is acting up, you,ll need to replace the switch that controls the
burner turns itself off on KESA907 I had soup simmering and saw that the burner indicator light was off. Soup also had stopped simmering. I turned it back on and within a minute or two it turned ...
Question about KESA907PSS Electric Kitchen Range
...used simmer select went to higher setting tried to go back simmer select said stove to hot to use then stove stopped working. You will need to replace the simmer board. Here is the part to
Question about 79012 / 79014 / 79019 Gas Kitchen Range
...front burner (the one with the simmer select button) is not working at all. Won't heat up. All other burners working. Help! You need to replace the surface element switch. Here is that part to
Usually answered in minutes!
1,163 Questions
465 Questions
395 Questions
390 Questions
353 Questions