Questions & Answers for: heating element bosch classixx dryer

Ad

Question about Classixx WVF 2402 Front Load Washer/Dryer

1 Answer

bosch wvt 1260 CAN YOU SEND AND TELL ME HOW TO FIT AN HEATER DRYER ELEMENT THANX dry heater is located under an aluminium housing on top of the machine. take it to bits and easy to fit. however, why ...

Ad

Question about Classixx WVF 2402 Front Load Washer/Dryer

1 Answer

Bosch WFF200L washing machine. It does a main wash however does not proceed to the next cycle and continues to carry on with the main wash procedure. Any advice? Many thanks, Peter Lee does it heat up

Ad

Question about Classixx WVF 240S Front Load Washer / Dryer

2 Answers

...Heating element? My wash cycle seems to go ok, but the dryer cylcle is not heating at all,although it is still opperating the short tumble actions.I have discovered that the timer for the dryer has ...

Question about Classixx WVF 240S Front Load Washer / Dryer

2 Answers

Bosch Classixx wash and dry does the element heat up then turn right back off after a few seconds? if so, there is 2 sensors that control the heat element, one is in the duct right after the fan. when

Question about Classixx WVF 240S Front Load Washer / Dryer

1 Answer

...dryer does not get warm. It stops after a few minutes and emits three sets of three beeps. Both the 'Drying' and 'Anti-Crease/End' lights flash. Most likely the heating element or a

Question about Axxis WTL 6003 Electric Dryer

1 Answer

...Bosch condenser dryer has recently stopped producing much heat. The drum still rotates but it gives out only a small amount of warmth. The problem seems to have been preceded by a warning light ...

Question about Axxis WTA4400 Dryers

3 Answers

...HEATING ELEMENT Pull out the water container and spill it out. This needs to be done every time, or every few times you dry a load . It looks almost like the detergent tray on a washer from outside. ...

Question about Axxis WTA4400 Dryers

3 Answers

Bosch Classixx WTL6003GB. Fails to heat. I have replaced the reset button & the element, to no avail, whats my next fail possibility? I notice now that the small printed circuit board on the top ...

Question about Classixx WVF 240S Front Load Washer / Dryer

2 Answers

...washer heating element. This video will show you how to replace the Bosch washing machine heating element and thermostat with step by step guide on the process maybe the heater was damaged or ...

wiring diagram for an old Bosch Classixx WTA3003GB/01 Tumble dryer, it's not heating at the moment and I suspect the element and/or thermostat is faulty. Request the wiring diagram directly from Bosch

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1479 Answers

Marvin
Marvin

Level 3 Expert

84625 Answers

Brad Brown

Level 3 Expert

18060 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...