Questions & Answers for: i can hear my tv but can see images

TV, i plug it in, turn it on, no image, "on timer" light comes on. I tryed unplugging it, all the buttons on the remote, nothign seems to work. If you dont hear a click theres a problem in the standby

Hear sound, Flashing light Hey, I bought this TV not working for $25 in hopes that I could fix it and have a decent TV for cheap. Anyways, the TV produces no image, the degaus works, I can hear sound,

...and the image was gone, I can see just an horizontal line in the middle of the TV. I can hear the sounds.. It does not smell burn.. you have cold solder on vertical IC. solder all crack contact IC ...

...hear the audio on tv. I tried with the hdmi cable and tv showed image with hdmi cable. Can i get assistance Turn off the system, Then when its in standby mode when the red light is on, press and hold ...

...hear background voices thru speakers. The manuals says to hold power button on TV panel for 10 sec. but nothing happened, screen still is blackout. 2nd time holding power button, image appears off ...

...hear the sound for TV but can not see the image on the screen. The lamp does not turn on and you cant hear the projector running. The lamp is blown, they expire after 1000-3000 hours and cost about ...

...tv on and it turns off in 2 seconds no image comes out either..I also pressed the system reset button and no luck.. no sound no image..I can hear a click that it is turns on but like I stated to ...

hear a click when turn on and off. my tv toshiba 51'' rear projection wont come on, no sound or image but i hear a click when turn on and off. most common reason is convergence problem

...HEAR A CLICK OFF Open up the TV and disconnect the Y-Main board from the power supply. Try turning it on again and if it stays on this time (no image) you need ...

hear the tv but can't see anything but image on screen I have an image stuck on my tv screen. I can hear the t.v. but can't see anything other than the image. Check and replace the T'Con board. If you