...headlights dimmed. Battery is ok, car starts repeatedly. Everything electrical works except for lo-beams. Fuses for lo-beams under hood ok, and switched lo-beam relay with foglight relay with no ...
...Mazda 6? I have a 2004 Mazda 6 and need to replace the headlight. How do you get the thing out to put the new bulb in? The owner's manual does not explain how to do this. it depends whether it is the ...
...2004 Madza 6? The driver's side low beam headlight is slightly easier to replace than the passenger side. The owner's manual states the dealer must replace this bulb, but it can be done yourself if ...
...headlights. The high beams work great still. Where should I start looking? First check the fuses located inside the hood or under the dash. If any are burned replace them. If not, then replace both ...
...headlights are out. Don't know if it's the bulbs, but all fuses interior and under the hood are good. Is it unussual for both low beam headlights to burn out at the same time? Could be the dimmer ...
...headlights didn't work. The high beams worked just fine. Any wise folks any idea what it could be? Thanks it is possible that the low beam headlight bulbs went bad at the same time, need to check ...
Question about 2006 Montana SV6
fuses beneath the hood If the headlights or alternative electrical elements don't work and also the fuses within the cabin square measuretraditional, examine the fuse block beneath the hood. If a fuse
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
