Questions & Answers for: head bolts 4 chevy

Question about 1999 Malibu

1 Answer

head bolts and rod bearings for a 1999 chevy malibu 2.4L engine hi 1999 chevy malibu head bolts 1-8 40 ft lbs bolts9-10 30 ft lbs tighten all bolts an additional 90 degrees rod bearings 18 ft lbs plus

Ad

Step 5: additional 10 degrees. Each step involves starting at the center two bolts of the head and alternately tightening in a criss-cross pattern, ending with the bolts on the outer edge of the head

Ad

...head bolts for a 1987 chvey s10 It depends on what engine you have....if its a 4 cyl.2.5L start from the centre and work your way out in a clockwise position...first torque pass all bolts to18 ft/lbs ...

...torque sequence 99 chevy malibu v6 3.1 engine, head bolt torque is-- 98 through 2001 is step1- 37 foot lbs, step 2- rotate an additional 90 degrees (1/4 turn). the rocker arm bolts are 168-in.

...head bolts. Hello there Torque Specs These specs may not be correct for your application. Verify your engine specs with a service manual for your year and model. always torque bolts in three equal ...

...head bolts (TTY) that permanently stretch during the initial installation. New head bolts must be used when cylinder head is replaced or re-installed to obtain proper torque. Hope helps (remnember ...

cavalier 2.2 need to know what to torque head bolts On the first pass, torque the long bolts to 46 foot pounds, short bolts to 43 foot pounds. On the final pass, turn all bolts and additional 1/4 turn

Question about 1998 Cavalier

1 Answer

...To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque. Hope it helps

head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque.Always coat bolt threads with

...3.4lt Follow these steps: 1. Tighten the cylinder head bolts to 44 ft-lbs (60 N-m) 2. Rotate the cylinder head bolts another 95 degrees 3. Now tighten them an additional 95 degrees 4. You are

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...