...hd widescreen tv program on my sanyo z5 projector i can see two lines where the 4 by 3 aspect would end, very distracting... noticed lines after watching 4by3 aspct ratio all day ,and then i switched ...
...HD-527575 problem The blue power lamp stays on blinking. The red light also stays on blinking. There is no sound and no picture. Tfan does not fast startup then shuts down. We just had the same ...
...it would be nice to have it work again although i have a nice HD CRT projector for my home theater now. why does it do this? go off and on. is it the ballast? turn your computer off then it shud ...
...HD 8000 DLP Projector and have had it for a year. The issue I am having is that the projector works find but for only 3-5 minutes and then it turns off and the Lamp Indictor turns on. Any reasons It ...
...for that price as everyone now wants HD and 3D. I recently bought 7x NEC NP115 for just over £200 each. Very good spec, auto power up (Which was important for what I needed) hope that ...
Question about Projector PJ800 Multimedia Projector
...hd projector lamp does not come on even though the indicator shows green light. I changed the lamp,but result is the same. Can anyone suggest what the problem may be? Check with a multimeter if the ...
...Power Point slideshows and videos that are online just fine. I would guess, remove Win8 and go back to a proper OS. I would also blame Windows 8 if the movies you played worked before you got the new ...
Question about XD206 DLP Projector
...HD 1080P Home theatre LED Projector, we cannot get the sound to work. What could be the problem? when set at AV the screen shows up but no sound, and when put on HDMI the sound works but no Screen. ...
Question about W1070 2000 lumens 1080P Full HD 3D Home Theater DPL Projector 2 x
...projector picture turns to static when power elsewhere in the house such as a light is turned on. my setup is from mac mini to Denon A/V receiver then to projector Try isolating all of the elements ...
Question about VPL-VW95ES Full HD 3D Home Cinema Projector vplvw95es
projector. If the power is not turned on, disconnect the AC power cord, then confirm the ON/STANDBY lamp is turned off. After about 10 seconds, reconnect the AC power cord and turn on the power again.
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions