Questions & Answers for: hayward super pump wont run

...Hayward Super Pump I bought a new Hayward Super Pump and there is a loud clicking noise from the motor as soon as the pump fills with water and becomes pressurized. When I backwash with the pump ...

...Hayward Super Pump is over Amping My old Hayward is about 5 years old and had no problem. Opened the pool this year and found the original pump was getting hot. Found Loose wires in the breaker. ...

...Hayward super Pump, for about 3 years, the pump was working fine, this week when I turn on the pump stated working find but after one minute starts making a tick tack sound. I want to know what's ...

hayward super pump self priming that stoped working all the sudden i have changed the capaciter and it still does not work does it turn freely if not check pump impeller for debris or damage repair or

hayward super II pump is cycling between hign and low speed every i second until it overheats and shuts off. What could be the problem VOLTAGE IS SET FOR 230 AND YOU ARE RUNNING IT ON 120V BACK OF THE

Hayward 1 hp super pump will run for a second and then trip the gfci. What has happened? Thanks. Normally the GFCI is doing its job. Water is getting into the internal of the motor. Try replacing your

...to come on at 4am and I forgot to remove trigger. When I went out to pump out to waste, the pump was running normally Hayward Super Pump, model C48L2N134B1 Is there a question here? Rod US Parts ...

Hayward Super Pump just clicks The pump was run hot for a while now it just clicks. Thinking swapping the thermal switch. Ideas? bad motor

Hayward super pump Find out your model number on your pump by checking the hayward site, for the super pump the parts manual is http://www.hayward-pool.com/pdf/Parts%20Diagrams/Super-Pump.pdf Once you

...Hayward Super pump and it trips the breaker after 5 seconds....I reversed the wiring and the same thing happened.. I reinstalled the old 1HP Hayward pump(6years old) and it runs fine...what is the ...