pool) where the cleaner connects seems low. The sweep cleaner does not move. I can hold my hand over the connection opening ther is not enough pressure to force my hand off. this could be two problems
just bought a new sweep because old one didn't move....this one still very slow, any ideas? This could be an air leak, a partial clog in the line, a clogged impeller, a clogged filter or an ...
...Hayward Navigator pool sweep does not move. The pressure is 7.5, the suction seems to be okay, and the "flippers" move, but the pool sweep just sits there. You may need to replace the pads on the ...
Question about Phantom Pool Cleaner Complete with Booster Pump
...Hayward Phantom cleaner to the pool's filtering system may seem like a simple part, but any damage to it may cause problems for the pool. In some cases, the sweep hose may simply be too long, so ...
Question about Phantom Pool Cleaner Complete with Booster Pump
...Hayward pool sweep wasn't moving, nor was there any water flowing from the outlets in the pool. I cleaned both baskets - nothing. I installed 4 brand new cartridge filters - nothing! The pump quietly ...
...Hayward pool sweep does not move to the shallow end. It only cleans the deep end and even that is not cleaned well. It seems to do a similar pattern over and over with not much variance. It worked ...
hayward navigator pool sweep does not move. we have replaced feet and flaps. . . . . The first question would be do you have the proper amount of suction to make it work. You didn't say if you had
Question about Navigator Pool Cleaner
...hayward navigator twists the suction hose until it can no longer move I can straighten the hose, and leave the cleaner at the point that is farthest from where the hose connects at the pool wall. ...
Usually answered in minutes!
1,045 Questions
774 Questions
337 Questions
287 Questions