Questions & Answers for: hayward pool heater leaking left

Question about H Series Pool & Spa Heater 400k Btu Propane Gas Milivolt Ignition H400p1

1 Answer

Hayward H300 Spa Heater will not fire up I have a Hayward H300 spa heater that will not fire. I get an error code of SF and HS. I just had this serviced 2-3 months ago and it worked fine twice. Any ...

Ad

...HAYWARD H1501 POOL HEATER THAT IS LEAKING WATER FROM THE CENTER OF THE BULB WELL THAT IS MOUNTED ON THE LEFT SIDE OF THE FRONT HEADER. HOW CAN I STOP THE LEAK? I HAVE A HAYWARD H1501 POOL HEATER THAT ...

Ad

Question about H Series Pool & Spa Heater 400k Btu Propane Gas Milivolt Ignition H400p1

1 Answer

...pool heater since I wasn't using it. how do i turn the gas back on so when I turn the heater on it works. Hayward H-series open shut off valve out side of heater and turn gas valve (inside of heater) ...

Question about Hayward 200k Ng H Series Spa & Pool Heater

1 Answer

...Hayward Pool Products Hayward 200k Ng H Series Spa & H250i Pool Heater Problem I keep getting a "lo" signal just after starting the jets on the spa, but it goes away and the actual temp shows ...

Question about H Series Millivolt 250,000 Btu Pool Heater H2501

0 Answer

my hayward pool heater is leaking through the drain plug use Teflon tape or use a oring

Question about H Series Millivolt 250,000 Btu Pool Heater H2501

0 Answer

pool heater my hayward h series pool heater is leaking thruogh the drain plug. Tried turning, tighten, remove and replace, still leaks alot. use Teflon tape or add a oring

Question about H Series Millivolt 250,000 Btu Pool Heater H2501

1 Answer

...by selecting from menu on left side.http://www.pentairpool.com/pool-pro/manuals/section.php?s=28Hayward ...

Question about 400fdn Low Nox Nat Gas Swimming Pool Heater ()

2 Answers

...Hayward pool heater h400fd is reading error code BD? Copy following link for Hayward error codes:There are several entries for error bDhttp://waterheatertimer.org/pdf/Hayward-error-codes.pdfHayward ...

Question about 250kbtu Ng Pool Heater - Inground

1 Answer

Hayward H series pool heater. There should be two. Remove the metal cover on opposite side of plumbing side and the "Return" heater will be exposed. There is normally a plug there. On "Header/Plumbing

Question about 100,000 BTU Pool Heater H100ID1 - Above Ground

1 Answer

...Hayward H100ID1 pool heater and it makes the loud clinking noise and the hoses shake when ever I turn on the heater. Reading the other solutions, I checked the diverter plates from both sides but ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Pool & Spa Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

john h

Level 3 Expert

29494 Answers

David Spradling
David Spradling

Level 3 Expert

13524 Answers

Are you a Pool & Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...