Questions & Answers for: hayward max flo pump motor

Hayward Max-Flo pump: Need to separate pump from motor Motor went bad on my Hayward pool pump... bought a new motor, so how do you get the pump off the motor? Remove the back cover from the motor, ...

how do i remove the impeller from a self priming max-flow pump by hayward Lock the shaft at the back of the motor and spin the impeller off counter-clockwise.

...Hayward Max-Flo II pool pump and it is very noisy. I already replaced all seals because it was also leaking. Are the bearings the cause of the noise? If so, how do I replace bearings? Sounds like the ...

max-flo II pump leaking at top (discharge) fitting. Removed and re-taped but still leaks? Can pipe dope be used, would that be better? Tape usually works better. Permatex sells a product that works ...

Hayward Max-Flo II pool pump and it is I have a Hayward max-flo ii pool pump and it is very noisy. I already replaced all seals because it was also leaking. Are the bearings the cause of the noise? If

Hayward Max Flo 2 hp pool pump stopped working again!!! I have a Hayward Max Flo 2 hp pool pump. Was working find and then one day we turned it on and the motor just stopped. This is our 2n motor in 4

...Hayward max flo pump model # c48k2n14331 , 1 horsepower pump. The electrical connection and plug in insert have burnt off. It is about 10 yrs. old. Can I get parts for this pump? Probably. Go to your ...

hayward 3/4 hp hayward c48j2n131 leaks bad seals replace whole pump

how to switch jumper from 220 to 110 v on hayward max flo II pump look on side of motor

Hayward MAX-FLO II trips breaker need new motor