Questions & Answers for: hayward h250

Hayward h250, wont heat Hi I have Hayward H250 Direct spark heater, and it sparks, and I can hear the gas valve energize, but then the display says HF, but there is no flame present? Sounds like it ...

...error code on gas heater H250 IDPL1 Error Code PF on my Hayward H250 IDPL1 what does it mean? check pressure switch if voltage both sides ok if not bad switch or clogged copper tube also check ...

Hayward H250 series pool heater smoke coming from high stack after heater was turned on for the first time this year. Thought it would go away, but it didn't, so turned the heater off. Removed

hayward h250 gas pool heater pilot won't stay lit. hayward h250 gas pool heater pilot won't stay lit. will light with the button depressed but whet i let go of the button after 30 seconds ...

hayward h250 ed2 failure error code IF ignition failure check gas source if ok check ignitor

I have a haward H250 heater,the pilot light is working fine,but the burnners won't light check the safety circuit or pressure switch

Hayward H250 has LO listed on the electronic panel after it had been blowing black soot out of it what Does LO mean as the diagnostic as is says call for service? also balck soot was blowing out of ...

Hayward H250 pool heater will not light I cleaned the burners, igniter, and flame sensor. The igniter does glow. The fan comes on. Gas flows. The burners will not light. After 3 tries, I get 1F code. ...

hayward h250 millivolt pilot light ? zmy hayward h250 pilot light will not stay lit. I replaced the thermocouple and it still will not stay lit. i would like to know how to bypass the pilot so it will

Haywood h250 ignition override not advisable check for loose wires and safety circuit