Questions & Answers for: harmonic balancer bolt size

...harmonic balancer puller for this car what size screws do i need im not sure wich size bolts you need but if you go to a parts store that has a balancer in stock they can match up the bolts you need. ...

harmonic balancer from a ford sport trac Most fords are 15/16 inch. butyou didnt state the engine size. Youll also need a harmonic balancer puller and most parts stores can rent you one some times for

...Harmonic Balancer), by putting sturdy socket,think its 19mm, or 3/4 " on the center crankshaft bolt, with a good size breaker bar, wedge the breaker bar in between the suspension, and drive axle, to ...

what size is the bolt in the harmonic balancer in a 1993 jeep grand Cherokee larado 5.2 liter bolt size i posted this yesterday 1-1/4" or 32mm buy and use a caliper to measure bolts.

...harmonic balancer? Need right size bolts for 3 holes to pull balancer off crank You could either have a balancer with 6x100 or 8mm125 thread. But, past experience has taught my that you may need to ...

Bolt size for harmonic balancer 1995 Toyota Tacoma v6 3.4l Harmonic Balancer Toyota Tacoma dimensions are approximately between 5-6 inches in diameter and 2-3inch wide,

2002 Nissan Xterra harmonic balancer bolt size width length I need specs on the harmonic balancer bolt it fell out last night I would take the old one out and measure it.

...harmonic balancer bolt size? Taking it off and need to know what size bolt it is? This is the bolt, but the answer is the size of the socket that fits it. If you don't have a full set of sockets and ...

...harmonic balancer from rubbing the timing cover? There was a key inside the shaft in the harmonic balancer was put on the key was not set right, and it was pushed back into the sprocket on the ...

the harmonic balancer please. Question edited for clarity. Question moved to model category. The bolt is in the link https://www.google.com/search?q=1999+Mercury+Villager+harmonic+balancer+bolt+size .