Questions & Answers for: harley high idle starting

...high RPM and after heating up the idle kicks down. You have a Temp sensor for this, which sounds like it is bad. I can not believe your bike would run at 100 rpm no way. harley runs at 950 to 1050 at ...

Harley engine Running high RPM, the engine runs fine for a while and then it starts racing at high RPM. If I shut it down and start it up again it's fine for a while. This is a 96Road King with fuel ...

High idle on start-up Harley Davidson 2003 FLHRCI; Motor idles at 2000 rpm on start-up. Runs rough for about 10 miles, then starts to run right including proper idling when stopped. Turn engine off ...

high on start up 1700 rpm.. then it will idle between 1000 and 1700 fluctating. Sometimes when driving the bike if feels like your giving it throttle. this problem seems to intermittant.. Your sucking

...idle is high 20 thosand rpm any thing i can try befor . thaking it to the dealer. thanks rick e. 20 thousand rpm? I don't think so. Obviously you're reading the tachometer wrong. It may be idling at ...

...Harley Ultra Classic which on start up idles real high if i pull the idle sensor it does go down but pours black smoke out the exhaust what is wrong with it. It is a fuel injection carb. It sounds ...

...idle high then it would idle at a normal pace and even lower and died once at a stop litght. Come in off the highway and it seems to idle just right but then after letting it sit for a couple minutes ...

...Sudden high idle trouble Twin Forum Harley Davidson Forums High Idle issue Harley Davidson Forums Harley Davidson Motorcycle Forum http://www.cyclespot.com/forums/showthread.php?t=24473 Good ...

...idle high after it warms up? the bike idles perfect when i first start it then after i ride for a little while and come to a stop it is idling high and won't idle down,and this only happens after it ...

...harley-davidson given me these codes PN 67478-04A ,PN 32919-07 ,and PN 68921-07 - Answered by a verified Motorcycle Mechanic. 1 answer · Top answer: Those are not codes ..they are displayed when ...