Questions & Answers for: harley davidson compensator sprocket

...harley davidson softail custom primary cover bolt pattern 1998 harley davidson softail custom. Need to know the bolt pattern for the primary cover engine/transmission Are u asking for the torque ...

...Harley-Davidson issued service bulletin a while back that changed the procedure for tightening the compensator nut, after a spate of bikes had problems with this nut working loose. Check with your ...

...Harley Davidson The torque specs are the same as with any Evolution engine. The compensator sprocket 150-165 foot pounds. Clutch hub nut (left handed threads) 60-80 foot pounds. Use Loctite 271 on ...

...Harley Davidson Heritage Softial. whats most important is red locktite,and dont overtighten clutchpack 50ftlbs clutch, compensator they've changed a few times through the different years but75ftlbs ...

...people call the engine shaft nut. It's on the end of the crankshaft's sprocket shaft inside the primary. It holds the compensator (engine sprocket) on. Torque is 150-165 foot pounds. Good Luck ...

...year" bike and there are lots of variations that appear on this model year. flh-1200/o/m764#sch165274">http://www.bikebandit.com/1969-harley-davidson-flh-1200/o/m764#sch165274 Good Luck ...

how to install compensating sprocket on a 1982 harley sportster Check out you tube there's lots about compensators for Harleys.

engine developed a bad vibration, can this be the compensator sprocket I would check all the motor mounts. A loose compensator sprocket would give a knocking noise more than a vibration.

does compensator sprocket stay lose after large nut is tight ? on 1340 evo motor With primary chain loose, there will be a LITTLE back and forth play on the compensating sprocket.

...for an 08 Yeah, it's a crappy design they changed over to, isn't it? The hot ticket is to swap the compensating sprocket out for a Harley Screamin' Eagle Compensator Sprocket, part number ...