Questions & Answers for: hard truck

91 mighty max hard starting then runs great, always hard starting 91 mighty max hard starting. then runs great. always hard starting could be coolant temp sensor

...the truck and the pedal felt hard &soft yet drove truck slowly and pedal was hard slowly stopped. thank you. yes, if the vacuum assist goes bad, the brake warning light should come

how hard is it to change my oil pump on mt 2001 sebring 2.7 lit is it a hard job to do on my own. thats a realy hard job to do yes pretty hard job

It's not hard to start..it's hard to go in 2 and 3 gear It's not hard to start..it's hard to go in 2 and 3 gear After start go to D and then to 3 and 2. Usually 3 should get you enough power ...

hard time putting this truck in first gear or reverce.when I finely get it into first gear I take off,and it still has problems going into 2,3,4,gears.the clutch pedal feels hard.(normal)when in first

How hard is it to remove the transmission in a Mercedes s420 1994? And is it hard to replace the clutches? hard as a nut. hard as removing ticks from a hound dog.

...hard 2-3 shift, almost like a clank? 4r100 harsh shifts 2-3 - Ford Truck Enthusiasts Forums www.ford-trucks.com > ... > Super Duty & Heavy Duty May 25, 2011 - 4r100 harsh shifts 2-3 Super Duty ...

brake pedal hard halfway hard to stop hards brake pedal halway down hard to stop abs lite not on scaner sais no voltage pump motor Not sure why you have scanner readout, but the most likely culprit in

...Hard Tranny Shift between 2nd & 3rd - Ford Truck Enthusiasts Forums www.ford-trucks.com > ... > Super Duty & Heavy Duty Feb 24, 2012 - Hard Tranny Shift between 2nd & 3rd Super Duty & ...

truck gears are hard to get why? comment on your statement of "hard to get" gears do you mean that selection is hard the selector lever is hard to move gears have no synchro action when changing gears