Questions & Answers for: hard drive desktop computer diagram

...hard drive out of the 8570 C Medallion HP I can't find a manual that describes how to get the hard drive out of the computer. It has two screws on the outside. There must be screws on the inside ...

...hard drive and put it into another computer that has up to date Antivirus. On the hard drive are pins with a little plastic piece attached to them above that should be a diagram SL = Slave, MS = ...

hard drive and need to replace it but I want o make sure all connectors were correctly connected. ok..this thing really sucks..look on hp web site and search the model of your computer and find manual

...hard drive (Gateway GT5694) since the original crashed. I didn't realize the replacement would have a jumper to install and therefor didn't look at the original close enough to see if it had a jumper ...

...hard drive in computer compaq A 2Tb hard disk will be a SATA hard drive. If your PC Desktop does not have a SATA disk controller then your have a couple of options. 1. Insert a SATA controller card ...

...hard drive of whichever size you want, and connect it to the IDE cable that your current drive is connected to inside the computer. If you don't want to reinstall windows, you'll have to either ...

...hard drive is an internal hard drive that connects to your computer's motherboard. It is even possible to connect multiple drives to the same computer; however, only one drive can be the master hard ...

...hard drive in my HP Pavilion A1230N PC with a Maxtor Model #96147H6 Hard Drive... After doing this I powered on the computer & at first it seemed to be powering on like normal then after a few ...

hard disk drive is having a mechanical trouble due to improper shut down or by hanging up. If this is the case, you have to reformat your computer operating system and or change you hard disk drive in

...hard drive trays and the connections for those drives that should be built into the computer. The SATA Data cables that were mounted to the drive bays. Any help you can give me would be greatly ...