the the green (ready / Data light) relights and nothing happens! The Mac can see the printer ok. Any ideas? Thank you. I just ran into the same problem. I changed the driver to postscript and it works
...Flashing, Red Off = Processing Data. 5) Green Off, Red On = Cover Opened, Toner Empty or Developer Unit / Drum unit missing. 6) Green Off, Red Fast-Flashing = Paper Jam or waiting for jam reset. 7) ...
...and data led's atr flashing what could The alarm and data led's are flashing what could be wrong. When this happened to me, the cause was a page stuck in the printer, found by reaching into the
Question about SCX-4300 Monochrome Laser Multifunction Printer
...printer displays: Data receiving > Flash erasing > Flash Programming > Checksumming > Download Ok then printer will restart. It's all. To reset all counters and unblock printer enter Tech ...
...happens? Uninstall your printer software,then remove all data cables of printer(i.e. USB) .Then reboot your computer ,after that reinstall the printer software & do not connect the USB cable ...
...printer won't do anything. First the ready light flashes, then the Data light flashes and then the Attention light flashes. It continues to cycle between the 3 lights. I've turned it off and ...
...happens. Pushing any of the buttons makes no difference and the ink cartridges remain out of reach at the right side of the printer. Turning the power on and off makes no difference. Any suggestions ...
Question about bizhub C250 All-In-One Laser Printer
When a print job is sent to my Konica Minolta Bizhub c352, it only flashes "data" light, but nothing prints. Does this happen when you copy. Try different document and program pdf word web page etc. ...
Question about bizhub C450P Laser Printer
...data LED is flashing but nothing happens. I changed image unit yellow in Bizhub C450, it works really beautiful, but i got printing problem: everything i try to print from network does not printing. ...
Question about bizhub C450P Laser Printer
...data LED flashes but nothing happens. Could this be a defective main board? I had trouble with my Cannon Printer so I uninstalled it from my computer and took my installation disc and reinstalled it ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions