...power outage in my home but the tv wasn't on nor was the Directv receiver box connected to it. I've checked all the cables,lines & connections everything is ok. I even had Directv make a service ...
power surge came in about 1 & 1/2 later, and I just heard several popping sound coming from my TV and lots of smoke. I quickly unplugged the tv from the wall. Before the 2nd surge the tv was workin ok
...iam talking about an antenna hook up yes you will need to get a box to watch the new digital signals that will replace the old analog signals that your set picks up now if you have cable or sat. you ...
...Iam getting audio I'm going to guess your issue is either that the cables are connected to the wrong spot on the TV, or your TV is not set to the correct input, unless something has happened to your ...
...power in the house went out momentarily and came back on. Later i went to turn on my TV (Philips 42PFL5603D/10)and there was no picture.All i got was a blue screen. Iam got a SKY HD box and i connect ...
...another TV into that cable jack yields all channels. Help. you can try a rescan of your channels if that does not work then you will need to rplace the mainboard iam assuming your NOT using a cable ...
...and a few minutes later you want to turn it back on. Can the cable box be the promblem? ITS NOT THE CABLE PROBABLY ITS SOME LOOSE CONNECTION IN THE POWER SUPPLY OF YOUR TV.HAVE A TECH LOOK AT YOUR
Question about FD Trinitron WEGA KV-32FS120 32" TV
happen half hr ago and pulled power cable out of box for few seconds and plugged it back in...turned it on and it basically reset itself works great now I only found a temporary solution to this which
Question about Pn64d8000 64-inch 1080p 600hz 3d Plasma 8000 Series Smart Tv
...iam getting all the other channels tried t tune in with remote didn't get channel 9 If you are using an antenna to receive broadcast TV you may have to rescan to add channel 9 back into the TV's ...
Question about Pn64d8000 64-inch 1080p 600hz 3d Plasma 8000 Series Smart Tv
...power cable from the Cable TV or SAT set top box. -Keep it unplugged for 2 to 3 minutes. -Plug the power cable back into your Cable or SAT set top box. -Give it some time for the Cable or SAT box to ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions