Questions & Answers for: handle power washer leak

washer gun handle is leaking water when pressed,what is the problem? Can it be fixed? The model number is 015356-203. The o-ring and the plastic insert is broken. They may not have a part replacement,

...power washer that just idels when you pull the handle. Why is it not reving up with pressure? Possibly has leaking seals or there is a blockage in the gun or hose. remove the hose first and see if it ...

power washer v2500bought a upgrade pump, only get half the pressure now. tried adjustment screw, engine stalls hard to pull start also, unless water off first.no leaks found, any idea. if you bought a

...is the handle seems cracked and water leaks. The seal in your trigger is gone... it shouldn't effect the operation of the pressure washer if you don't mind getting a little wet from the

...handle, or can you assist me in stopping the leak? Hello sir, that is a on going problem with power washers the pump not working, than works sporadically. the main cause is leaving the pressure hose ...

1750 husky power washer the handle is leaking big time Buy a washer kit for it at Home Depot.

handle, replace O-ring(s), replace the packing washer, tighten the packing nut, or replace worn packing, depending on the valve type . If a ball or cartridge faucet leaks from the collar, replace worn

...handle inside bends then gos on the end of the trigger in the bend ther is a small triangulor piece on the cornner it is leaking from ther can i get this bit any were No parts for the gun. I'm not ...

...power washer leaking gun wand leaking handle There are no parts available for the inside of the guns. All you can do is replace the gun. see parts in ...

handle leaking water, need replacement There are quite a few replacement guns and hoses. If you do a search; " replacement power washer guns" you will have many sites wit numerous guns that will work.