Question about LS2208 Handheld
...Red Laser Light going out We just purchased 18 LS2208-SR20007R-UR with the USB connection. Right off the bat we have 6 that do not have a Red laser light. Is there a fix for this or do I need to ...
scanner up to a laptop and now it won't read the barcodes. It beeps and flashes a red light. I have scanned the factory default settings and it still doesn' t work. you read the code base? Try another
...scanner are solid and base light flashes red on and off every second or so. [email protected] make sure you have a 3478 cradle. We ran into that. We have 3478's and 3578's. You have to look at the gun and ...
Question about MS1690 Handheld
...red light blinks. Model has power Model has power when hooking up to computer...even beeps three times like usual. When I go to zap some bar codes, nothing lights up anymore. there is illumination ...
brought back from scanning a warehouse and the scanner light is stuck on red and I can't do anythigng including off/on ry to enter setup - set default
...red light but no transmission of data First, you need to find whether the problem is with the scanner or not .To do this you are supposed to change the scanner and if the problem continue try to ...
...Handheld Barcode Scanner. It was in the elementary school library when I got the job this past school year, and looked like new. I don't think it had even been used. I used it with a laptop for ...
Question about Voyager 1200g Barcode Scanner 1200G2USB1 Handheld Barcode Scanner
...scanner lights red once you scan, it scans once and turns blue and will not scan again until you unplug it and it repeats the same thing. please help Both ends of your cable need to be plugged in. ...
Question about Wired Handheld Barcode Scanner
...scanner. Once plugged into USB, flashes green light, but displays no red barcode reader, if i hold the trigger for 5 seconds or so, it beeps about 5 times, then red barcode reader shows up, but will ...
Question about GRYPHON M130 C Wired Handheld Barcode Scanner
red light will not stop flashing. Scanner won't charge. Batteries are not old. Did you succesfully bind the scanner to the base or not?
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions