...plug (With its copper sealing washer.) which is about 10mm away from the hex head bolt holding the handbrake cable bracket to the caliper. The allen key can be easily turned, and it takes about one ...
...handbrake light is on. Car was running on 3 cylinders previous to the lights coming on. 1999 Mazda SP20 Familia (323) I have a Mazda Capella (626) 1998 and had similar problem other than it was ...
...mazda 626 wont turn over, I have changed the battery still wont go, the light which looks like the handbrake signal with the exclamation sign comes on, what does this mean? It sounds like either the ...
...handbrake on my 2000w mazda 626? The adjustment is found under the boot for the hand lever. You must remove or lift up the boot which surrounds the hand brake lever. Use a deep socket to tighten the ...
...mazda 626 Not 100% sure but peel back the handbrake lever cover.Beside the lever where the handbrake cable attaches there may be an adjuster there.Either directly on the cable itself or by locknuts ...
Mazda 626. Removed parking brake cable as per repair manual. However, after reinstalling the cable, I don't seem to be able to adjust the parling brake correctly. It appears that the adjustment nut on
car moves when handbrake applied,rear disc brakes. The hand brake needs adjustment and more than likely the rear disc brakes are worn out. Replace the worn pads before adjusting the hand brake. check ...
Mazda 626 handbrake light comes on when I touch brakes It's your disk pad wear indicator warning you of imminant replacement of pads . They ground electrically thru contact in brake pads and require ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions