...replacement. If no voltage is indicated, you need to trace back through the circuits (starter solenoid, safety switches/relays, connections) until you do get 12-13 volts. The place where it stops is ...
The fuel lines pulled out of my 1978 GS550 when I was replacing the clutch cable. I need help hooking them back in the right places. I don't know which are fuel lines and which are vacuum and how they
there is an oil leak from the push rod so i am trying to replace the rod and the seal... thing is i don't know how to do that The only push rod in your bike is the clutch push rod. It is on the left ...
A FRIEND GAVE ME A 1982 SUZUKI GS550L WAS PARKED FOR OVER 5 YRS + AND IT STARTED WITH A JUMP START I THINK THE BATT IS NO GOOD DONT HOLD CHARGE WHEN ITS RUNNING , THE FLANGES HOLDING THE CARBS LEAKS ...
...gs 550 l starter clutch replacement 1985 gs 550 l im sure i need to replace the starter clutch. i need a good procedure for removing the side cover to get to the clutch. i'm told it can be a little ...
...clutch cable on a 1982 suzuki gs 550l remove the cover behind the shift lever, remove old cable and fitting that runs into top of said cover. Next, route new cable from lever along handle bar, run ...
...clutch cable to my 1979 suzuki gs 550e snapped and didnt know if it was a fairly simple fix or if it was something that would require a mechanic. Oh, and the person before me has stripped 3 of the ...
...Gs 550 L will not start when hot Hello, Jeff, I just got my gs550l from my uncle and he had the carbs done for me and its running great. Before I changed the oil it would crank fine cold or hot and ...
...GS 550 Hi, David for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download ...
Usually answered in minutes!
652 Questions
681 Questions
595 Questions
586 Questions
644 Questions