...front end alignment all replaced. I still hear a knock that sounds like the ball joints. I took it to 2 different shops to be checked and they told me everything looks very good and usually they make ...
front tire, and feeling for a "zerk"/grease fitting there too. These usually point up. Wipe up excess grease and repeat every couple of oil changes. It ain't rocket surgery, so don't be afraid to jump
...front of the "Caps" on the U-joint. You must remove these clips. Then position the driveshaft between blocks of wood or a good sized Vise to get clearance below the joint. Now you will fit a socket ...
...front end support and remove the tires.Then remove the caliper assembly by removing the two anchor plate to steering knuckle bolts this should allow you to remove the caliper.Be sure you dont allow ...
...grease gun and lubricated your fittings under the front and center of the car. They also sprayed your rubber parts like bushings and grommets with a lubricant. We don't do that anymore. Now, your ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions