Questions & Answers for: grease fittings front end 2004

...in front right tire where is the grease fittens in a 2000 model Buick there is no grease fittens but you can get an end with a needle on it for your grease gun and that way you can lube the ...

Scrubbing in the right front tire Where is the grease fittens on a 2000 Buick IF IT IS ORIGINAL FACTORY THERE ARE NO GREASE FITTINGS.

2004 Buick Lesabre, drivers door hinge starting to seize up - I have lubed with white lithium grease but no change. I did not want to use WD or similar product. Any ideas Grease will not flow into the

...front end. This is a 1997 Buick Lesabre with 78K miles. A worn CV or other joint, perhaps? You may find it's either a worn CV joint or it may just need greasing up. Check the bellows for splits, and ...

will a drivers side front door on a 1996 buick lesabre or 1997 buick lesabre fit a 1998 buick lesabre The LeSabre had the same body style up until 1999 in the rounded style. So it should fit just fine

...There are no grease fittings on your Buick. Most manufactures started using sealed joints in the early to mid 90s. If a joint is making noise it will have to be replaced. No grease certs anywhere on ...

...with none greasable joints both ball joints and tie rod ends,however it they have been replaced then they will have grease fittings on them that require greasing each time you have your oil

...there any grease fittings on the struts No grease fittings I am aware of. Most car companies stopped using them in the early 1990s for steering and ball joints, never have been used for

grease zerks on a 2004 buick park avenue? they are located on the bottom of the ball joints, outer tie rod ends if they have been replaced other wise they are what is called permanently greased joints

...grease fittings for a 1999 buick lesabre? Also how many are there? None--Unless New Outer Tie Rod Ends--Then 2 There are two in the front on each side (ball joint and outer tie rod) and one on each ...