Questions & Answers for: grease a5 oster

grease? Thanks see this link, its for the A5. The A5 is the animal version of the 76. http://www.peasridge.co.uk/clipper-advice/clippers-products-oster-a5.shtml I dont know what model you have, but if

...A5 clipper parts. All these parts should have a light coat, where they move, of lithium grease, and the two pads (one on each side of the lever) should be oiled. You might also check the condition of ...

...A5 clipper parts. All these parts should have a light coat, where they move, of lithium grease, and the two pads (one on each side of the lever) should be oiled. You might also check the condition of ...

oiling Where do you oil the Oster Golden A5? there is a silver oiling nipple next to the name plate depress the centre and oil, also clippers must be greased in the gearbox underneath the name plate.

...A5 clipper? Oiling the motor is not necessary keep your blades regulary oiled, you can grease the gears inside the gearbox and oil the front bearing through the oil nipple located behind the name ...

...A5 twin-speed clippers lost power half way through grooming a dog there was also a slight burning smell. I'v cleaned out the fur from inside the body but its made no difference? bushens inside, i can ...

...grease and oil the Oster Golden A5 two speed clippers clippers at? The cover plate is the part with two screws that has the name and other info on it. If you remove the two screws and the plate, you ...

...A5 clippers. Are replacement motors available and if so how much are they please? It sounds like you know pretty well what you're doing and mainly just need parts then. I suggest clipperparts.com. ...

...use in it. When I put a 10 or 30 blade on, it sounds like a thrash machine. The 40 seems OK. I have greased it as instructed and used blade wash and put cool oil spray on the blades. sounds like the ...

...A5 dog clippers in a few years and the blades look rusty. How can I clean them? Also, where do you put the lubricating grease and where the oil? ok rush can be removed with wire wool or a wire brush ...