Question about Flo 04325143A Marine Heavy Duty Water Pressure Pump
how do i prime a gould jet pump turn pump on,pour water in the 3/4 plug on the top of pump.feathering the valve so its not open all the way. pump will not kick on all the time
Question about Flo 04325143A Marine Heavy Duty Water Pressure Pump
...to prime a gould j5 well pump no plug on top power off for 6 days no water cant find a priming plug on the pump you have to have electric power to use a jet pump more info needed as to what is going ...
Question about Goulds gt10 1 1 Phase 115/230V centrifugal Self-Priming Pump
what is the impeller The impellor is that blade attached to the motor shaft and has curved blades (some exposed others in a two sided unit) that throws the water from the center and out the outlet ...
...Gould GT15 with an exact same pump (Gould GT15). I can't get the water pressure going to full pressure. What should I check? check for air leaks in the connections our your pressure switch is ...
...GOULD PUMP whats your question how to prime the pump? if so at the bottom is a 3/4 inch plug screwed into it, or at top, once the pump is hooked up to the lines turn off the power, and unscrew the ...
Question about Goulds 1/3 Hp 115V 1 Phase Sump Pump 3/8" Solids
...water wasn't working... I tried to prime it without success, then replaced a piece of pipe above the footer valve that had a corroded hole... the footer valve looks functional, and no apparent air ...
Question about Goulds gt10 1 1 Phase 115/230V centrifugal Self-Priming Pump
...water to the pump. remember that centrifugal pumps only supply a vacuum in the suction line and atmospheric pressure on the water does the rest. when the weight of the water is equal to the pressure ...
...gould j5 pump Where do i add water to prime this pump to make it easy to prime a pump I put a "T" piece in the suction line close to the pump. When it needs priming I take out the plug and put water ...
Question about Goulds gt20 2 1 Phase 230V centrifugal Self-Priming Pump
The pressure is low on my home water pumping system. The pump works but the pressure stays at 30 pounds. Have you checked the pump intake for any blockage?
Question about Goulds 1/3 Hp 115V 1 Phase Sump Pump 3/8" Solids
...prime George: There is a packing or valve in the pump that is supposed to keep water in the pump. Either a packing (O ring) or a one-way valve has failed. If it is a "one way valve" there may be a ...
Usually answered in minutes!
136 Questions
113 Questions
61 Questions