Questions & Answers for: gmc jimmy 4x4 light blink

...thank you for any help! The 4x4 actuator located on the front axel/tranny transfer case is probably faulty. Make sure the electrical connector that goes to it isn't damaged. Should be a easy

gmc jimmy slt 4x4 i purchaced this Jimmy from a friend last may and was told everything worked fine, and that the 4x4 mode was never or seldom used back around the time it was new. Today we have had a

...the transfer case was not working. It will still go into 4 low but not 4 high. Replace the electrical switch on the transfer case and it should work again. 1998 blazer 4x4 high inop. but 4x4 low ...

...gmc yukon xl 4x4 wont engage when u push 4hi or 4 low. light just blinks and wont engage.it worked fine 10 minutes befor that I HAVE THE SAME PROBLEM,WHEN I TRY TO ENGAGE 4W/LO OR HI OR AUTO 4W , I ...

...jimmy will go into 4x4 low, but will not go in to 4x4 high. the light selector for the hi/lo sitch also blinks and both lightsstay lit. even when in 4x4 low sometimes. any help out there hi how are ...

...the service 4x4 light is on,any help. sounds like the electric dis/engage motor on the side of transfer case though check all fuses in cab and under hood prior to any major work. motor is 179.00$ ...

4x4 not work most likely the problem is in the transfer case if its an electronic switch to engage the 4x4 then check your relays if its a shifter then signs point to transfer case

...GMC jimmy 4.3 ltr vortec. Push button 4x4. I push 4 low transfer case engages into low gear but front hubs don't engage. the truck is in 2 wheel drive but in low range. Could be the servo on ...

...gmc jimmy the 4x4 is not working it has the push button on the dash and when you put it in 4x4 the lights work but it dont go into 4x4 when i try to put it in 4x4 the lights work but it dont go into ...

...gmc jimmy, 4x4 not operating no indicator light to show position, why would indicator lights for transfer case not be working, therefore, 4x4 not changing if you have no lights that's one thing , but ...