Questions & Answers for: gm audio troubleshooting

...GM-5300T amp in my girlfriend's car (1999 Pontiac Sunfire). When I completed the installation everything worked properly (i.e., sound was coming from the subwoofers). However, as my girlfriend was ...

Power light kicks on then off when I turn on the stereo I connected everything as per instructions and everytime I turn on the radio the amp doesn't kick on but only emits a blinking power light on ...

...gm remote start bypass", like DEI model 556L? if not it is the passlock that is not allowing the car to start. Either the remote keyfob is faulty or it needs reprogramming.Keyfob remote not working ? ...

...GM manual for 05 -07 cobalt. It has wiring diagrams for starting,charging systems, for all lights, for instruments and gauge lights systems, for audio, for HVAC systems, for power window and doors, ...

audio dinger like if the door were open and the dinger won't shut off. GM Serial Data Network Testing One of your modules is bad , probably ! Or a sensor or something shorting out the bus , Could even

...gm bluetooth loses its pairing every time car is turned off and I have to re do everything Try doing this: Ask your dealer for the latest TMB concerning bluetooth and the connection problems with a ...

jordandirtbiker Well i have a 98 Station wagon with a aftermarket Pioneer 2100IB H/U With a pioneer gm3300t amp 2 Front speakers No Rear speakers, When I turn my car on my H/u Turns on so does my amp ...

...audio system is stuck in the 'loc' position. We didn't have a code so we can't unlock it. Suburban How to Reset GM Theft lock Radio's Article Disclaimer: This article is meant to be used by Delco ...

My Pioneer GMX552 Seems to have been hooked up properly, with power and the speakers have power to them. The RCA pin are connected, however I am not receiving any sound. Can I get a list of ...

GM-5500T audio amp in the car. Just opened and installed. Power indicator not lighting. Checked power wire with multimeter and showing 12 volts. Only thinkg not hooked up is speaker outputs. Should ...