Questions & Answers for: glass top stove burner seems

glass top stove hard to work we have a problem getting the stove top elements to work. some work better than others. the oven controls work perfectly every time. do these buttons detect heat or ...

...glass top stove? If set to high, burners should remain on. If set to medium high let's say, they would be on for maybe 70 percent of the time, off for 30 percent of the time. If set to warm, they ...

...top burner wont stay on cut on high but wont stay on keeps cutting off help dont know how old unit is or how familiar you arewiththe unit, but the burner will need to heat up and cycle off/on. no ...

...glass top stove has turned black in spots and i can't get it off seems to be in glass what can i do for the problem The nice grey-flecked surface coating is very thin; the solid black is underneath. ...

...glass top units. well i'm not sure if your problem is with your large or small single burner or the large expandable burner. If it's the large or small single burner replace the burner and if it the ...

glass top with 4 burners, they had the same thing happen, the cost to replace the top was 1,200.00. So I would assume that you can get a new stove with 4 burners less then it would cost to replace the

...stove top? For Tappan stove model 30-3053-23-02. Each burner (4) is mounted to the stove top with three 4.5mm hex screws. All 12 screws must be removed, which is easier said than done. In my case, of ...

...top (one with the burners underneath a glass plate). Model number: 911 99004990. I believe it was purchased close to or around March of 2000. The problem I have with this stove top is that when I try ...

Model 970-6023022 Kenmore glass top stove, my problem is the large stove top burner will intermittently stay on high even when we turn the control to low bad switch in the large burner control.

...glass cover on top of stove as spring wasn't keeping it open, Cleaned it now need to retension, How? The process for reinstalling a glass stove lid over burners may vary depending on the specific ...