Questions & Answers for: gearbox gear difficult

...gear has broken off into gearbox after filling the gearbox with fresh transmission oil the speedo plug was replaced then the car was moved then the speedo stopped working and could not change gear at ...

Ad

...gearbox needs to be opened. Your problem could be cause by a synchronizing gear, defective bearing or bushing, etc... A lot of things can happen in a gearbox. So, I suggest that you take your car to ...

Ad

gearbox...massive quote gear box 2002 mondeo replacemnt quoted at 1,700?? sound gratey and difficult to find a gear. have to force it. ford have quoted the above for a gearbox???? to near to christmas

gearbox. Can select gears ok when engine is cold, but after 15 mins running it is very difficult to change gear. Car runs perfectly on short journeys, but once the engine is hot it is always the same.

...and is happening more frequently now. The car also is difficult to shift in to reverse and sometimes shifting to first gear can be difficult also. its possible clutch or even gearbox oil level ...

Question about 2007 Liberty Sport

1 Answer

...gearbox filter change gear box filter Hi Ucc, The auto gearbox filter is housed under the valve body inside the gearbox. To access it the pan must be removed from under the gear box. Cleanliness is a ...

a hoist and trans jack availble Not difficult once all the gearbox to engine bolts loosened. Also loosen propshaft, gear lever rom inside cab, starter, gearbox mounting bolts and all wiring to gearbox

Question about 2007 Liberty Sport

1 Answer

...the gearbox oil and checked that the links between the gear lever and gearbox are still all there and ok as far as I can tell. check your shift bushings, if they are worn out can cause your

Question about 2007 Liberty Sport

1 Answer

...1st gear jumps out when clutch is released and second gear can be difficult this dosent happen all the while first i would try changing the gearbox oil but it sounds like internal gearbox ...

gear change shaft with pliers or vice grip ? To install,make sure gearbox is in forward and controls are in forward,can be a bit difficult if this is your first time. Upper gear change shafts can also

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...