...Gear 1 ratio incorrect, P0733, Gear 3 ratio incorrect and P0870 Trans fluid pressure/switch c circuit. Any help with fixing this problem? First check and make sure the fluid is full. The most likely ...
gear ratio error codes fordifferent gears. The most likely cause to see all of these codes together wouldbe an input or output speed sensor. If your speedometer does not work, replacethe output. If it
I got this code: p0731 - Gear 1 Incorrect Ratio, where can I find what to do? Does the speedometer work?
gear 1 ratio incorrect p0715 input/turbine speed sensor a circuit malfunction p0733 gear 3 ratio incorrect p0700 trans control system malfunction how would i fix these problems on a 1999 dodge avenger
I have the same problem code P0731 is the only code the code talks about 1 speed out of range P0731 code in my book states Gear 1 incorrect ratio
Question about 2005 Rio
...sensor high input, P0731 Gear 1 incorrect ratio, P0732 Gear 2 incorrect ratio. Is trans junk and needs replacing? No --- it just needs the TCM checked out as that is indicated by the series of
...Gear 1 Incorrect Ratio Possible causes - Low transmission fluid level - Dirty transmission fluid - Shift solenoids - Transmission mechanical problems - Transmission hydraulic control circuit Tech ...
...sensor/switch "A" circuit range/ performance. p0876 transmission fluid pressure sensor/switch "D"circuit range performance. p0700 transmission control system malfunction. p0731 gear 1 incorrect
...Gear 1 incorrect ratio. a few things in/on tranny could throw this code something as simple as dirty trans filter,shift solenoid, trans control module to more serious internal damage. Check the ...
Question about 2009 Azera
...gear 1--incorrect ratio===causes ==wiring--TR sensor / switch---shift solenoid--transmission mechanical fault TR ( transmission range ). If it was working before the problem , and there were no ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions