Questions & Answers for: ge xl44 oven stay

ge spectra xl44 The oven gets up to temperature and then the temp just falls. It's very erratic (sometimes it works). Could it be the temp sensor or the ignitor? Also the temperature lights stay on. ...

GE XL44 Range My GE XL44 oven isn't working. The small light in the oven lights, but there are no flames present. I can only smell the gas escaping. What can I do? The pilot light is lit to light the ...

ge spectra xl44 stove My ge spectra xl144 oven works except when i try to use the bake option it stays @ 100 degrees and wont heat up. Burners, broil & self clean all work. Any ideas? Most likely the ...

...GE XL44 I tried several times to get my oven to work and nothing seemed to help. After downloading the manual from this site, my husband locked and unlocked the oven door several times very hard and ...

...GE XL44 and the stove top burners will not light automaticly. I have to put a external flame to the gas when turned on. It looks like there is some sort of ceramic heat module that the burner sits on ...

xl44 oven burner pulses, doesnt properly heat up. we have a xl44 gas stove. 2 years old. the broiler and stove top burners work fine. the oven burner ignites and the glow bar igniter stays orange, but

...xl44 spetra gas oven and the control panel will not let me ajust the temp up it stays on 100 when I press the start button thenelks, we are having the exact problem as I type this...... did you get ...

...GE XL44 Gas oven and the burners work fine and everything is getting gas but when i light the oven it will stay on for a little while and then shut off. What could be the problem? Hi, The ignitor is ...

...GE XL44 range. The burners light and the pilots stay lit. If you have standing pilots, make sure the pilot for the oven/broiler is lit as well.  When you turn the thermostat up to call for heat, ...

GE xl44 gas cook stove. when trying to broil, a beeping sound comes on,and the preheated light comes on. wont stop till you turn the oven completly off.broiler only stays on for a few seconds. I have ...