Questions & Answers for: ge washing machine leaves 1

Question about WBSR3140DW Top Load Washer

1 Answer

...leaves about 3 inches of water in the bottom , it spins but very slow. Not too familiar with this machine. First clean out your filter, refer to manual. Plug off the wall socket. Then try to ...

Ad

Question about WBSR3140D Top Load Washer

1 Answer

GE Top load washer. Water leaking out the bottom of the machine when washing machine begins agitation cycle. If the machine is turned off the water stops leaking even with the tub full of water. Hello

Ad

Question about GLDA690MWW / GLDA690MBB Built-in Dishwasher

1 Answer

...Leaves a few inches of water in the bottom of the machine. I've checked all the drain lines everything is fine. Not having a manual for the machine makes it difficult to troubleshoot it beyond this ...

Question about Profile WPRE6100G Top Load Washer

1 Answer

...GE, and from your description it sounds like you need to replace the WH23X42 water pump (about $50). It is one 1/4 inch clamp on the bottom holding on the flexible drive, three 5/16 hex head screws ...

Question about WSXH208A Front Load Washer

1 Answer

...water out of the bottom onto the floor and now it is leaving about 2 inches in the bottom with the clothes after the load is finished Sounds like the main bearing has gone bad and that is causing you ...

Question about W 123 Front Load Washer

1 Answer

...GE washing machine smells of meldew, I don't see water in it but when I shake the machine i can hear the water sitting at the bottom. How do i drain this water and also how do i get to it? IMPORTANT: ...

...GE washing maching runs water into it, but the water flows right back out. How to keep the water in? Make sure that your drain hose is at least 20 inches from the base of the machine and is not ...

Question about WSXH208A Front Load Washer

2 Answers

GE front load washer leaving clothes soaking wet Please help! My washing machine is leaving my clothes soaked...I have to try to wring them out before drying...I don't think it is spinning but I can't

Question about WSXH208A Front Load Washer

1 Answer

...ge washing machine level control is located in top panel before opening top panel unplug washer from wall if clearing line does not work level control will probably need to be replaced suggest take ...

Question about WF203ANW Front Load Washer

1 Answer

...leaves water remaining in drum after the entire wash cycle, it becomes stale and makes my clothes that I was smell. My father's front loader, GE, does not leave any water in the drum Hello Check the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...