Questions & Answers for: ge washer fills water load

...GE washer ok I had a flood a few weeks ago, posted it here, and the solution was because i had the washer on its side the water level tube was filled and caused it too overflow, Now it has done it ...

GE washer Hi, My GE washer will not fill on cold. Right now I am using it having the hoses hooked up backwards I have cleaned the filters both inline and at the outlet. It seems to be working fine ...

...fills up while it is washing. The water will overflow if you have it on medium or large wash. It will stop filling when the wash cycle is done and starts draining. you may have a problem with your ...

...washer with water and wait for the timer to get to the drain mode.Unplug the washer from the electric outlet.Open the case, and disconnect the water hose from the outlet of the water pump.If you get ...

...fills up with water and then nothing. I'm not a repair professional. I am just a 78 year man who has done his own washer repair for about 50 years.I believe you have a bad lid switch. (Assuming this ...

...ge washer on and it starts to fill, it doesn't hold the water. I did one load and when it was done there was water in the tray. I put a little water in the machine and turned it to spin, this time no ...

...GE washer that during the spin cycle / rinse on my washer the water won't shut off and will run and run until I turn the water valve off. This occurs during spin cycle when it adds water but the ...

...GE/Frigidaire/Kenmore stacked washer/dryer combo units).While a simple repair can be done by yourself for a failed inlet valve, usually for $25-$50 in parts/shipping (go to searspartsdirect.com or ...

...washer and it wont flush it out I have had this problem before on my GE Arora front loader. Just remove the lower front panel. There if its like mine there should be a cap and you unscrew the cap. It ...

...GE washer G153 was making a loud noise when draining/spinning out. Next load filled up with water and done nothing else. Now machine turns on but will do nothing. have an electrician check out the ...