Questions & Answers for: ge refrigerator 57 degrees

...refrigerator section is at 57 degrees and not cooling. The freezer section is steady at -5 F. Help! We are not sure what precipitated the temperature swing up; however, within about an hour of ...

...refrigerator still is reading 57 degrees. The freezer has come down to 24 degrees since. The recommended temps. are 0 degrees for freezer and 38 degrees for fridge. Please help! Thank you!! Check to ...

Ge model PSC25MSTASS digital refrigerator setting is set at 37 degrees but refrigerator temperature stays at 42 degrees. Temperature will not go below 42 degrees. Freezer temperature follows digital ...

refrigerator are not as cold as they should be I have a side by side ge profile model psc23sgrd ss and i came home to find that the freezer was at 37 degrees and the refigerator was at 57. its set for

GE ARCTICA Refrigerator, M/N PSS26PSTA - poor cooling Temperature in refrigerated compartment: 46 degrees. Temperature in freezer compartment: 10 degrees. Turbocool does not make it much lower, just ...

...degrees stays that way for 12 to 24 hrs. This happens about every three to four months. my refrigerator was at 105 degrees this morning it is a GE profile artica, any suggestions? change sensors

Refrigerator temp reads 57 but freezes everything changed main board and then the correct temp was registering then went back to 57 after about an hour HAVE YOU CHECKED THERMSTAT AND OTHER ELECTRONIC ...

...Refrigerator is dropping. HAVE reset the temperatures to GE's recommendation of 0 Degrees and 38 Degrees, but currently at the actual temperatures are currently 14 degrees in the Freezer and 47 ...

57 degrees Fridge will not cool lower than 57 degrees. Attempted unplugging, waited 10 minutes, did not help. Freezer section working fine. Several days ago fridge made loud strange noises, not unlike

...57 degrees I reset display/fridge, I defrosted, still goes to 57 degrees It's possible that the issue may be with the thermostat or the compressor. If the thermostat is not working properly, it may ...