Questions & Answers for: ge microwave turns door opens

...GE microwave. When I partially open the door (not fully open, just a crack at the top), the microwave will start buzzing. The buzzing stops if I close the door or open it completely. I did not open ...

GE microwave won't turn off We have a GE monogram ZMW2000 microwave, about 14 years old. When we shut the door, the fan and light are on, non-stop. If I set it to run for x seconds, and hit start, it ...

...GE microwave now comes on when I open the door It was cooking something for 2 minutes, turned off and then when I went to open the door either the fan came on or the whole microwave came on. The ...

...GE Microwave - labeled "Sensor Turntable" but unsure of model number. Microwave runs. However, when the door is opened, the microwave turns ON. Have reset our breaker. This does not fix and ...

...is the part number for the primary door sensor switch? My GE JVM1850 microwave turns on when you open the door and when the door is shut and you try to put in a time and hit start it blows the ...

...ge microwave When the door is opened the fan and the turn table start running. It seems to cook ok - what to do? I'd be AWFULLY NERVOUS about that - you don't know if the magnetron is also generating ...

GE JTP85WOA1 microwave turntable spinning when the door is shut & not in use. stops spinning when door is opened My microwave stopped heating so we ordered part 556. When we turned on the circuit ...

GE Microwave Convection Oven model JE 1390WV runs whenever the door is open. It microwaves on the normal settings, but when the door is opened it turns on and runs. DO NOT USE IT!!!! THERE IS A SWITCH

GE profile microwave internal fan continues to run when door is closed . When door is opened it shuts off . This is not the exhaust fan . Overall the microwave still works fine ?? It is a cooling fan ...

...GE JTP86S0H5SS. When microwave door is closed, light turns on and turn table starts turning. When door is open light turns off. I replaced all 3 door switches. What else could be done to fix this ...