Questions & Answers for: ge dryer air coming vent

GE Profile dpsr473ewoww timer doesn't work and heat level is low The timer doesn't work and the level of heat in the drum seems quite low. I assume the two issues are connected and fixing one will ...

...GE dryer won't heat up put a thermostate on still won't heat up only cold air comeing out of vent Check the flame sensor for continuity(if open no heat) Check the ignitor for continuity(if open no ...

...dryer on my GE SpaceSaver stacked washer/dryer combination? You have a 4 inch duct hooked to the back of the dryer. The hot air, moist air etc. go through it to wherever it is vented to. Outside, ...

dryer gets warm but doesnt dry clothes the vent is usually plugged go outside and see if air is coming to the vent if not pull the unit away from the wall and the vent behind the dryer maybe crushed

GE electric dryer heats well, spins, but does not appear to be venting. If it is not venting out the back of the dryer open the door and reach up inside the bottom area that closes over the filter ...

...GE dryer Space does not work for rear venting. Need to vent from left side of dryer Unlike some other dryers that have knockouts on the side and allows the vent to come out the side I don't believe ...

dryer gets hot but my clothes come out hot and wet. Like its not getting air circulating. I cleaned the vent, but it still doesn't dry clothes Did you clean all the venting inside and out? Also, there

...ge harmony profile dryer and when its cold usually below 40 the screen will not come on the light inside the dryer when i open the door will come on but the touch will not come on until the room is ...

...GE gas dryer is not drying, I noticed there was no air coming out the vent out side. I checked the lint trap and the venting of the dryer and it is clean. disconnect the exhaust vent from the back of ...

...GE dryer Adora he senor dry when I turn on the power the sensing light comes on and the dryer does not repairs performed on an home appliance should be serviced by a professional repair technician. ...