...gate goes up about half way and returns to the closed position. What is going on? try removing your shocks/struts for the lift gate. once removed, check to see if they fully extend in and out of the ...
...gate valve (wast gate) sticking open so the turbo cant cut in till its screeming then the gate shuts and the old girl picks up her skirts and go's,,, you may get away with just blanking off the EGR ...
...gate valve for shut off on plumbing line into filter housing then YES it can unscrew inside and little or no water will come through. More likely there is a restriction in the filter itself, the ...
...open the gate, the motor turns in the opposite direction (close) and tends to close further. Then if I deactivate the gear box and open manually, when I re-engage the gear box and try close the gate, ...
Question about Sediment Water Filter Heavy Duty
...gate will partially open or close on occassion. Re-entry of a code will usually cause the gate to complete its closure. This has created a serious security problem for our company. Any ideas would be ...
...liberty rear latch stuck Latch on rear lift gate stuck in closed position and wont release. Lift gate is open and cant be closed until latch is opened. no answer but same problem. ever figure it
Question about Sl 3000 Ul Sliding Gate Operator
...gate. This adjustment is located next to the timer in a tiny blue square potentiometer with a white screw adjuster. Don't turn this too hard. Adjust it in both directions until the problem goes away. ...
Question about Automatic / Electric Gate Lock Fm-143
...open position. So the gate is stuck in a half open position? If you have already tried resetting it, you might just need to call in someone from the company. Some gates have an emergency retract ...
Question about Automatic / Electric Gate Lock Fm-143
...gate valve then the whole intake can vibrate and sing even how much you try to wedge the pips its the gate valves cause issue in cold water then it uses presure joints and presure makes the seal but ...
Question about 2013 Chaparral Mid Profile 325MKS
...gate. If the valve sticks and you pull ******* the handle it can pull the threaded portion out of the "gate". If this happens, you have to get access to the valve and remove it. This is a big mess on ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
