Question about PW2102 Gas Pressure Washer
...pressure in hose and stalls engine Last time I tried to use the washer I had had to keep the trigger pulled on the gun other wise it would build up to much pressure between the pump and the gun and ...
Question about Briggs & Stratton 020272 Elite Series Portable Gas Pressure Washer
Engine Stops after 10min run time check the breather hole on the gas cap. run the engine with the cap off and see if it still stalls.
...pressure washer. Engine code is: 1 OH902 / 0113E1. I checked the air cleaner (seems clean) and primer (squirts fine) and cleaned the plug. Unit is not run very much. This is the first time I have ...
pressure continues to build then stalls if te unit builds up pressure then stalls the motor, the unloader isnt working. it bay be corroded or the O ring are U/S
...pressure washer, that i start with the choke on. as soon as i shut the choke off it stalls First thing, if you are using last years gas stop and get some fresh gas, old gas is enemy #1 of small ...
...pressure washer and it starts fine and runs for 30 seconds and shuts off. it feels like the motor gets stuck when i try to start it again, but after a half hr or so it will turn over and do the same ...
...pressure but quits right away It's the spark plug more than likely. If engine turns but won't stay running its more than likely spark plug. If that doesn't fix its the gas. Empty gas out get some ...
Question about 3300 Psi / 3.0 Gpm Gas Pressure Washer 40678
...out while using pressure washer nozzle Pump issue. There is not much you can do but try spaying silicone into pump output port to loosen up the bypass and load valves. If no glory you need a new
Question about Pressure Washer PSI 3000
...but not empty. Filled just in case and the engine started. Ran about 5 minutes then stall as out of gas. Restarted using choke and did the same. Next time would only run for seconds before stalling. ...
Question about MegaShot 3100 PSI Gas Powered Pressure Washer - Pressure Washers
Won't start after stalled out while running before? Motor runs unevenly? Maybe getting to much air or bad gas, bad plug.
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions