Questions & Answers for: gas going to the oil

gas and oil 32 to 1. That equals 4 ounces of TWO STROKE ENGINE OIL to one gallon of gas. NEVER use motor oil in the gas. Only two stroke engine oil. There may be an oil build up in the crankcase. Do a

...gas supply not cutting off in turn going through the valves to the oil ,,, if you dont have a needle vavle could be the fuel pump not working right,, good luck,, Depending upon how old the mower is ...

Need to know the gas to oil mixture for a stihl bg 55 leaf blower, 2oz oil / 1gal gas is a good rich mix. you can go up to 2oz oil / 1 1/4 gal. gas. Use only good quality oil.

oil gas mix and lists some types of oils. Where can I get these oils, how do I mix. What do I mix it with , how do I load the fuel etc. go to your hardware store and ask for some 2 cycle 50:1 oil, mix

...gas &oil mixer be wrong(does smoke abit) or in the carb? it's a Jiangsu sinski, xsj50qt-4g no its all that oil in the fule tank the oil is to thick to go through the carb jets,,fix the oil ...

...gas-oil rotio? Who is the manufacturer? A safe gas to oil ratio is 32 to 1. Many modern two stroke motors can safely use 50 gas to 1 oil, though. If you are not sure, go with 32 gas to 1 oil. One ...

gas tank. If you are going to change the oil soon you can use 1/2 to 3/4 of a can in the oil. Make sure to change the oil in less than 100 miles. Seafoam thins out the oil and if it is in too long can

...gas and two cycle oil together and put it in the back at a 50 to 1 ratio or is the two cycle oil go in front and the gas go in back? You Put mixed gas in the back, some chainsaws take a mix of 32-1 ...

...pressure go up when i push on the gas then i let up it drops? as you step on the gas the rpms go up ,the oil pump rpms also go up ,the faster the oil pump turns ,the more oil pressure you will

...2 cycle mix from the gas tank and start with a fresh gas and oil mix and fresh bar oil. The mix for the Poulan Wildthing is a 40:1 mix. You are definitely going to smell gas when using any chain