Questions & Answers for: garmin nuvi shows press dot

...shows up as 1.please help [email protected] garmin 255w 1q6087034 if the screen is not responding properly you have to recalibrate the screen by holding the power button to the left for 30s or so and ...

...where no maps to show. Idont know how this happened. I remember It ask me to press on a dot, than press on another dot and when I take a look at the gps there are no maps anymore. Please help. ...

...Nuvi screen stuck - white back with black dots and direction to 'press dot'. I tried everything I read on-line (including here)  with no results. next morning I took it to Radio ...

...attached a link to the manual which shows a photo of the location and page 13 describes the reset in more detail. Thanks for using FixYa ...

...the real screen? Here is a link below to the solution to the same problem. This will work on all Garmin Nuvi models. Thanks for using FixYa ...

...shows the K also the eraser wont work Hello, A screen calibration should resolve this problem. This can be done by turning the nuvi off and turning it back on while holding the power switch to the ...

Garmin nuvi 50mlm Turn on and a screen showing press dot shows up and can't go any further to get screens watch thishttp://www.google.com.pk/url?sa=t&rct=j&q=&esrc=s&source=web

Garmin screen comes on, then a screen showing press dot comes up and won't go any farther can't get passed the press do screen. Do I have reset the receiver and how do I reset the receiver

...shows "press dot" and when you do, the dot moves. after on for a while, its says 'lost satelite reception. That is a screen calebration. get out a pencil and use the erraser end to chase those dots ...

Nuvi to a PC with a USB cable and rename the file "GUPDATE.GCD" within the Garmin directory to "GUPDATE.OLD". Once the file has been renamed, repeat the above procedure. Once you reach the calibration