Questions & Answers for: gaggia xd evolution

...gaggia evolution turns on. When I hit the coffee button the pump turns on, but the hoses are not drawing water into the boiler so, no coffee, no steam. Suggestions? I have had this same problem - it ...

...Gaggia Espresso Evolution Hi, my Gaggia is not drawing water into the pump. I've tried the suggested solution of forcing water into the pump by syringing it up the intake hose, but with no luck. ...

Gaggia Evolution Espresso won't heat up Hi, my machine won't heat up when I switch it on. The power light comes on and the pump still works, but the water isn't hot. Any advice appreciated. 1 heating ...

...Gaggia evolution and when the brewing has taken place and I remove the group head the basket is full of water. check silenoid valve maybe he dont release pressure The cheaper gaggia machines don't ...

...gaggia evolution leaks water while making coffee .It appears to be coming from inside the machine and leaks everywhere.I have disassembled the machine but i still can 't see where the water is coming ...

...Gaggia evolution espresso machine basically stopped working because water comes out so slowly that it would take an hour to make an espresso. I tried to take off the unit where the water comes out ...

i need to find the manual directions for the gaggia evolution expresso machine You can get the manual here. http://www.wholelattelove.com/manuals/gaggia/evolution.pdf good Luck

Gaggia Evolution is overheating My Gaggia Evolution is about a year old. Recently it appears to be overheating. Coffee comes out with little crema, and seems ''grainy-like''. It runs so hot I can ...

...Gaggia Evolution has a water leak between the brass steam valve and top of cast alloy boiler. Where can I get a new rubber seal to fit this? The easiest place for this is either servicesunlimited.com ...

...Gaggia Evolution was awesome when I bought it. But within 60 days it seems to be unable to generate enough steam/pressure to foam milk effectively. Is this a known problem or is my unit on the fritz? ...