...ignition key on but nothing happens. No clicking as to may indicated starter. tried turning the engine over with lights on still nothing. Help. The problem would be the starter they go without any ...
...fuse (also used for LED) 3. If not go to main dealer Engine does not start: LED flashes rapidly Leave ignition on until the LED starts to flash a 2 digit code: (sequence- pause-sequence) Check the ...
...fuse together. Your ignition switch also has adjustments on the column on some models, so when you replace the switch; the rod or cable the switch connects to has to be the correct length. You ...
...ignition switch to the ON position. Your test lamp should light up for approximately 2 - 3 seconds then go back out. If it does, then you powertrain control relay, your fuel pump relay, ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
