Questions & Answers for: fujitsu reset unit

...FUjitsu AC BlinkingLED error codes for ductless split. Looked in manual as wel as on wall unit but can not find a list of what the blinking lights means. Operation and Timer light blink 5 times then ...

Ad

Question about 24R1 Air Conditioner

1 Answer

fujitsu a/c model number AST24RSG-W it stop working 2 days ago` fuse is ok, power suplly to the mother board is ok reset SW3 switch in mother board no dispay on the unit can somebody help me please do

Ad

Question about fi-4340C Flatbed Scanner

1 Answer

reset the pick roller counter on my 4340c scanner? First go to this site: http://www.fujitsu.com/downloads/COMP/fcpa/scanners/fi-4340c_maint-guide.pdf and download Fi4340c PDF, look over directions on

...Fujitsu mini split indoor unit is flashing error code 97 (outdoor unit fan motor 1 error according to the installation manual error codes list). Is there a way to reset it? I had ice buildup in the ...

I have a Fujitsu wall mount. It’s not turning on and the remote is not responding to the unit. I try resetting it and nothing. No light turn on or flashes. Check power to the outdoor unit.

...Fujitsu AOU24RML1 WITH TWO INDOOR UNIT# ASU9RMLQ when i put them on, unit one the upper level do the job, the second unit its not , i can see the lights. When the fan is on High position on second ...

Question about fi-4340C Flatbed Scanner

1 Answer

Thank you I have a Fujitsu and found that disconnecting from mains power at the breaker for 2 hours did a better reset. When you turn back on, you can hear the condenser unit outside doing a self test

...reset with the front panel button and the problem persists while both the green and the red light are flashing I have a Fujitsu Split unit inverter with a second evaporator in the attic. I am not ...

Question about fi-4340C Flatbed Scanner

2 Answers

/www.google.com/search?q=fujitsu+agu12rlf+manual You can also try turning off the power to the outside unit for an hour to reset the circuits on the outside compressor unit. This usually works on mine

...Fujitsu Halcyon, it needs to be disconnected from the mains at the breaker for 2 hours to properly reset. Use that time to clean the filters in the wall unit. The clicking you hear is self testing of ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Heating & Cooling Experts

Paul Carew

Level 3 Expert

3807 Answers

john h

Level 3 Expert

29492 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Heating & Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...