Questions & Answers for: fuel vent on husqvarna

vent is located (doesn't seem to be in cap). Any suggestions? Hi First check the fuel filter ,inside of the gas tank:After that, try to find out where is the airating sistem(gas tank vent):For example

...fuel, I've been told to clean the tank vent, and that still dosen't work, I've even run the saw without the vent filter in and it still acts like it runs out of gas. You can open the tank, and ...

husqvarna 435 fuel tank vent location Saw stalls. It starts and runs great. But, I believe the vent is plugged. I cannot locate the vent to clean it Tank vent is Number 18

...435 stalls. Where is the fuel tank breather vent located? Has new gas, plug, ect. the vent is threw the carb  but try and run it with the muffler off the screen inside plug up they can be ...

...the fuel tank vent could be damaged, this allows pressure to equalise in the fuel tank. Generally it allowa air in but not out the tank, If fuel is exiting the tank then this could have been

...vent for gas tank ? runs 5mins and quits. Venting issues are not common on these saws in my experience. could be a cracked fuel hose. check for scoring on cylinder. may be loosing

...vent and fuel line. Husqvarna common air leak - YouTube ? 1:51 https://www.youtube.com/watch?v=Z7f9zNQTJBQ Apr 11, 2012 - Uploaded by mweba1 Husqvarna common air leak ... Husqvarna 136 ...

...idle, will cut out when turned chain side down. Could be a fuel tank vent issue, air leak in fuel line. Husqvarnas love rattling screws loose. Try altering the idle by turning the 'I' screw

could be a tank vent problem. Loosen the fuel cap and run the mower, if it stops stalling the tank vent is clogged or bad. If this makes no changes, you may have a blockage in the fuel lines or filter

...1 1/2 out still no good Could be any number of things. Fuel, fuel filter, fuel line, fuel tank vent, fuel impulse, carburetor, intake leak, crankcase leak (shaft seals). ...