Question about 2000 Sportage
...fuel sender assembly and remove from the tank. Wrap the fuel pump assembly in a rag before removing the assembly from the vehicle. Cover or seal the fuel tank until installing the fuel pump assembly. ...
...fuel sender assembly' which includes the fuel pump, the fuel tank gauge sending unit, the fuel pump strainer and related components. These fuel pump module assemblies are expensive. Be sure of the ...
...fuel sender from the tank, the reservoir bucket is full of fuel. Use caution in containing the fuel. NOTENote the direction the strainer is pointing. Negative battery cable Spare tire and jack Trunk ...
...fuel pump sender with special tool Fuel Tank Sender Wrench D84P-9275-A Click to Enlarge Fuel pump module lock ring. Use special tool Fuel Tank Sender Wrench D84P-9275-A. Fuel pump module To install: ...
...fuel sender from the tank, the reservoir bucket is full of fuel. Use caution in containing the fuel. NOTE Note the direction the strainer is pointing. Negative battery cable Spare tire and jack Trunk ...
...all fuel lines from sender unit. lower tank all the way now place tank on floor and undo metal securing bracket on top of sender unit lift sender unit out of tank and again access to remove
...Fuel guage sender unit location The fuel sender in located inside your fuel tank. it will most likely be screwed to the side or the top of the tank so you may need to remove your tank to gain access ...
Question about 1997-2000 Chevy Gmc C K 1500 2500 3500 Pickup Fuel Pump Module Sender
...fuel pump Sender units 1997 s10 pickup ? where is the fuel pump Sender units located? In the fuel tank. You will have to drop the fuel tank to gain access...the "sender" is located on the top of the ...
Question about 1997-2000 Chevy Gmc C K 1500 2500 3500 Pickup Fuel Pump Module Sender
fuel pump sender units. It makes sense in a weird way as it does keep wire runs short and makes access to the fuel pump and the sender unit more convenient than in other vehicles. The downside is that
...fuel sender assembly is located at the top of the gas tank and is accessible via a fuel sender access panel bolted to the floor inside the trunk. Be sure to follow all safety precautions when working ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions